CNC Machined Straight Tonearm Angled RED Headshell Pure Silver Wires!

Description

CNC Machined Straight Tonearm Angled RED Headshell Pure Silver Wires!
Type:
1/2' Headshell
SME type 4 pins connector with pure silver leadwire
for straight tonearm
(
1 set = 1 pcs
headshell with
fingerlift + 1 set 8, 10, 12, 15mm
aluminum CNC machined
screws nuts kit
, same as photos above
)
Weight:
10g
every headshell with fingerlift
Angled shape suitable for almost all of straight tonearm
Suitable for 1/2" mount cartridges
Headshell is
CNC high precision machined
from a single block of
aircraft grade aluminum
, Lightness and durability high quality aluminum
Red anodized aluminium
, so it is a durable treatment
that resists scratching and marring
Two
lengthened (
long
23mm ) cartridge mount hole
, much longer adjusting range than anyother headshell, fit
almost all of straight tonearm
s and cartridges
The connector fit most turntables with a
SME
Type
Connector
Mount
.
The connector dimensions are
8 mm diameter x 12 mm length
.
All 4 pins on headshells are
24K gold plated.
5N Pure Silver litz wire
is the best wire for faster transmission speeds, lossless data and cleaner sound. It's
0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.
Every piece color lead wire is made of
2 pieces
transparent 30AWG FURUKAWA 5N Pure Silver litz wires and litz construction for much more cleaner sound.
Wire length: 2 inches (50mm) long with female connector sockets on each end
Terminals on wires are phosphor copper and silver plated for good electrical conductivity and non-allergy reaction.  Each terminal end is wrapped in color coded shrink tubing.  Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end,  black heat shrink at the head shell end.
Application:  Color end is fitting diameter about
1.20~1.30mm
pins on cartridge, black end is fitting headshell
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
Every one headshell will package with 1 set
8, 10, 12, 15mm
aluminum CNC machined screws nuts kit.
All of the screws and nuts were strict precision CNC machined from a single block of aircraft grade aluminum
Application:  this screw fits all of standard headshell-mounted cartridges and headshells, light weight, without any magnetic, high polish, exquisite craftsmanship, excellent quality.